SAE AMS2604 Pressure Testing, Gaseous Media, 40 Psi
作者:标准资料网 时间:2024-05-19 09:50:46 浏览:8318
来源:标准资料网
Product Code:SAE AMS2604
Title:Pressure Testing, Gaseous Media, 40 Psi
Issuing Committee:Ams B Finishes Processes And Fluids Committee
Scope: This specification provides requirements and procedures for gas-pressure leak testing of parts.
【英文标准名称】:StandardTestMethodforHydrogenSulfideinNaturalGasUsingLength-of-StainDetectorTubes
【原文标准名称】:使用着色长度检测管对天然气中硫化氢的试验方法
【标准号】:ASTMD4810-2006
【标准状态】:现行
【国别】:
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D03.07
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:含量测定;硫化氢;天然气;试验方法
【英文主题词】:gaseousfuels;naturalgas
【摘要】:Themeasurementofhydrogensulfideinnaturalgasisimportantbecauseofthegasqualityspecifications,thecorrosivenatureofH2Sonpipelinematerials,andtheeffectsofH2Sonutilizationequipment.Thistestmethodprovidesinexpensivefieldscreeningofhydrogensulfide.Thesystemdesignissuchthatitmaybeusedbynontechnicalpersonnelwithaminimumofpropertraining.1.1Thistestmethodcoversaprocedureforarapidandsimplefielddeterminationofhydrogensulfideinnaturalgaspipelines.Availabledetectortubesprovideatotalmeasuringrangeof0.5ppmbyvolumeupto40%byvolume,althoughthemajorityofapplicationswillbeonthelowerendofthisrange(thatis,under120ppm).1.2Typically,sulfurdioxideandmercaptansmaycausepositiveinterferences.Insomecases,nitrogendioxidecancauseanegativeinterference.Mostdetectortubeswillhavea"precleanse"layerdesignedtoremovecertaininterferencesuptosomemaximuminterferentlevel.Consultmanufacturers''instructionsforspecificinterferenceinformation.1.3ThevaluesstatedinSIunitsaretoberegardedasthestandard.1.4Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:E24
【国际标准分类号】:75_060
【页数】:3P.;A4
【正文语种】:
基本信息
标准名称: | 立式锥面包铬圆柱蜗杆减速器 |
中标分类: |
机械 >>
通用零部件 >>
联轴器、制动器与变速器 |
发布部门: | 西安重型机械研究所 |
发布日期: | 1995-12-01 |
实施日期: | 1996-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
归口单位: | 西安重型机械研究所 |
出版日期: | 1900-01-01 |
页数: | 12 页 |
批文号: | 机械科[1995]978号 |
适用范围
本标准为首次制订。 本标准规定了立式锥面包络圆柱蜗杆减速器的基本参数、型号、标记、尺寸、技术要求与承载能力。 本标准规定的减速器主要适用于化工、制药、建筑、食品、轻工等行业。 减速器工作环境温度为-15~+40℃,海拔高度不超过1000m。当工作环境温度低于0℃时,起动前润滑油必须加热到0℃以上,或采用低凝固点的润滑油。减速器可正、反向运转。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 联轴器 制动器与变速器